Olympus VS120 - Acquiring Images; VS120-L100 Image Acquisition

Acquiring Images / VS120-L100
1
Page
1 Acquiring Images
1-1 VS120-L100
This section describes how to acquire images of several slide glasses by using the automatic transport function.
For this purpose, the following modes are available:
Quick Batch: It is to acquire images automatically without making precise settings.
When this mode is selected, follow procedures in the sections whitch carry (Quick Batch) marks
on top of the sections.
Expert Batch: It is to acquire images by setting the scanning area (XY) and focus.
When this mode is selected, follow procedures in the sections whitch carry (Expert Batch)
marks on top of the sections.
1 Starting Up the System (Quick Batch) (Expert Batch)
First, turn on the monitor , followed by the
microscope control box
, slide loader , and
controller
to start up the system.
After the system has started up, double click the
[VS-ASW] icon on the desktop to start up the
software and begin adjustment of the stage.