3
Playback
28
EN
Playback
Playback settings
You can select various file playback methods
tailored to different applications and tastes.
[
Noise Cancel
]*
(☞ P. 43)
A setting that makes recorded
voices more discernable when
muffled by projector noise or
similar sounds.
[
Voice Balancer
]*
(☞ P. 43)
Compensates low-volume
portions of recorded audio files
during playback.
[
Playback Range
]
(☞ P. 43)
Selects whether to play back
individual files or all files in
a folder.
[
Repeat
]
(☞ P. 44)
Repeatedly plays back the
range selected in [Playback
Range].
[
Skip Space
]
(☞ P. 44)
A handy function for quickly
moving the playback position,
and playing short segments
repeatedly.
[
Play Scene
]
(☞ P. 29)
Switches to the playback
operation setting. In this setting
transcription can be made
while listening to recorded
content.
[
Play Folder
]
(☞ P. 54)
Use this when you wish to
switch to the [Recorder] folder
or another folder in [Music].
* This function is only available when a file in
the [Recorder] folder is selected.
Listening with earphones
You can connect earphones to the
microphone/earphone jack(
) of the voice
recorder to listen to its sound.
• Earphones are not included.
1
Connect the earphones to the
microphone/earphone jack ( )
of the voice recorder.
To microphone/earphone jack
2
Press the `
PLAY
/4
STOP
button to
start playback.
• When the earphones are connected,
no sound is output from the speaker.
f CAUTION
Avoid excessive volume when listening
to playback through the earphones. It may
cause hearing damage or loss.
NOTE
• To avoid irritation to ears, set the
volume to [00] before wearing
earphones.
• If the volume is set too high when
using the earphones, a warning screen
may be displayed.
• Set [Select Jack] to [Earphone] when
you cannot hear sound even when the
earphones are connected, or when
playing back with an external speaker
(☞P. 48).
To Next Page
Loading...
