Olympus VP-20 - Playback Menu

4
Playback menu [Play Menu]
43
EN
Reducing noise during playback
[Noise Cancel]
Use the [Noise Cancel] function to reduce
noise when a recorded voice is difficult to
discern.
[High] [Low]:
Reduces surrounding noise to play
back clearer sound quality.
[OFF]: The noise cancel function is
disabled.
NOTE
• [Noise Cancel] function is only
available when a file in the [Recorder]
folder is selected.
• If the [Noise Cancel] function is used,
the battery will deplete more quickly.
• The following function will not be
available while you are using the
[Noise Cancel] function.
• Changing the playback speed
(☞ P. 30)
Adjusting low volume portions
during playback [Voice Balancer]
The [Voice Balancer] function adjusts low-
volume portions of recorded audio files to
make them louder.
[ON]:
Adjusts low-volume portions of audio
files during playback, making them
louder.
[OFF]:
The voice balancer function is
disabled.
NOTE
• [Voice Balancer] function is only
available when a file in the [Recorder]
folder is selected.
• Using the [Voice Balancer] function
will drain the battery faster.
Specifying the range to play back
[Playback Range]
Select the playback range according to your
preference.
1
Press the + or – button to select
[ Recorder ] or [ Music ].
[Recorder]:
Set the playback range for playing files
recorded with the built-in microphone.
[Music]:
Set the playback range for playing files
transferred from a PC.
2
Press the + or – button to select
the setting.
[File]:
Stops playback after the current file
has been played.
[Folder]:
Plays all the files in the current folder
consecutively, stopping playback after
the last file in the folder is played.
Playback menu [Play Menu]