Olympus WS-831 - Changing the Display Language [Language]; Selecting the Speaker Output [Speaker]

5
76
EN
LCD/Sound menu [LCD/Sound Menu]
LCD/Sound menu [LCD/Sound Menu]
Changing the display language
[Language]
You can select the language used in the voice
recorder’s displays.
• [Čeština] , [Dansk], [Deutsch],
[English], [Español], [Français],
[Italiano], [Nederlands], [Polski],
[Русский], [Svenska], [簡体中⽂], [繁
體中⽂].
TIP
• The language selections vary
depending on where the voice recorder
was purchased.
Selecting the speaker output
[Speaker]
You can set the built-in speaker to be ON or
OFF when the earphones are not connected.
When set to [Off], sound will not be output
from the speaker even if the earphones are
accidentally disconnected. Use this setting to
prevent possible embarrassment on public
transport.
[On]:
The voice recorder’s playback sound is
output from the earphones when the
earphones are connected, or from the
built-in speaker when the earphones
are not connected.
[Off]:
The voice recorder’s playback sound is
not output from the built-in speaker
even if the earphones are disconnected.
NOTE
WS-833 model only
• The setting for this function only
applies to file playback. To set
how speaker output is handled
when listening to FM radio, see the
description of the [Output] item in the
[FM Menu] menu (☞ P.81).