FM TRANSMITTER
TR EM 1000 HE DIG PLUS COMPACT
Technical Manual 1v2 November 2019 33
2.2.10 Changing from full operation to stand-by and vice-versa
During normal operation, you can place the transmitter in stand-by by pressing the
ON/STAND-BY button. The device is on stand-by when the ON LED changes from green to
yellow.
To perform the reverse operation, press the ON/STAND-BY button again. The ON LED will
light up in green.
2.2.11 Turning off the transmitter
To completely deactivate the device (for maintenance, etc.), we recommend that you first put
it on stand-by, as described above, and then completely turn off the device via the general
power switch.
To Next Page
Loading...
