FM TRANSMITTER
TR EM 1000 HE DIG PLUS COMPACT
Technical Manual 1v2 November 2019 59
3) Select the password change menu and change the level 1 or level 2 password which is
currently active
4) Note down the new level 1 or level 2 password currently active and store it in a safety pace.
- Changing the level 3 password
Some unauthorized people who know the level 3 password preset in the production could
alter the setting of the transmitter even when it’s protected with either one or both the level
1 or two passwords. For this reason you can change the level 3 password preset in the
production. This operation must be done only if you are absolutely sure to note down the new
level 3 password and stored it in a safety place.
IMPORTANT! Always note down the level 3 password and sore it in a safety place. Should
you loose it, the total reprogramming of the equipment or the CPU replacement at OMB
will be mandatory – with the related costs which this operation involves. This kind of
service is not included in the warranty.
To change the level 3 password :
1) Use the knob to select the SETUP menu and press it to confirm.
2) When the password is prompted, enter the level 3 password which was set during the
production to A B C D.
3) Select the PASSWORD submenu. As you can see, the command SET PASSWORD LEV 3 (set
level 3 password) also appears in it
4) Select SET PASSWORD LEV 3 and change the password by following the procedure stated
previously.
You can change the level 3 password, but not disable it, because its setting is always fixed to
ON.
To Next Page
Loading...
