FMTRANSMITTER
TREM1000HEDIGPLUSCOMPACT
TechnicalManual1v2November2019 80
3.11.3 TELEMETRY(OPTIONAL)
Thisoptionalinterfaceboardallowstheremotecontroloftransmittersandsystems(ofany
type)manufacturedbyOMBviaLANorInternet,inparticulartheEMDIGPLUSseries.
In order to allow control of the system on which the board is installed, an IP address
compatible with the user's LAN must be specified and accessible on the transmitter.
Alternatively,that IP addresscan again beassigned to astatic public address withInternet
accessthroughtherouterandusedforremotecontrolfromanyexternallocation.
Inthefuture,thisboardwillalsoincludeamodemfortheconnectionofGSMdata(afeature
stillunderdevelopmentandnotcurrentlyavailable).
The board is programmed with the same firmware for all types of devices and directly
“interfaces”withthecontrolcard(CPU)withineachsystem,allowingacontinuousexchange
ofinformationabouttheoperatingparameters.
3
2
4
1
TELEMETRYETHERNETboard,parts