Omcan SP200A User Manual

9
Installing Mixer Attachments - SP300AT / SP300A
Ensure machine is off, lower bowl to loading position. Open the Guard by lifting it up towards the top of the
machine until it stops. (Fig.9) Raise the attachment through the shaft, keeping note of where the notch is.
(Fig.7) Guide the notch through the path until it reaches the end and locks. (Fig.8) To remove attachment,
follow the instructions above in reverse order.
Operation Instructions
Fig.9

Omcan SP200A Specifications

General

Brand	Omcan
Model	SP200A
Category	Mixer
Language	English