Omega CNI32 - Wiring Outputs - Wiring Hookup; Figure 2.9 Output Wiring Hookup A) Mechanical Relay and SSR Outputs; B) Pulse and Analog Outputs; Figure 2.10 Communication Output Wiring Hookup A) RS-232 Output

2.3.6 Wiring Outputs
This meter has two, factory installed, outputs.
The SPDT Mechanical Relay, SPST Solid State Relay and Pulse Output
Connection are shown below.
Figure 2.9
a) Mechnical Relay and SSR b) Pulse and Analog
Outputs Wiring Hookup Outputs Wiring Hookup
This device may have a programmable communication output. The RS-232 and
RS-485 Output Connection are shown below.
Figure 2.10
a) RS-232 Output Wiring Hookup b) RS-485 Output Wiring Hookup
This device may also have an excitation output.
Figure 2.11 Excitation Output
11
Use copper conductors
only for power connections
Excitation is not available if
communication option is installed.