Omega OM-DAQXL-1 Series - Thermistor Wiring; Bridge Sensor Wiring; Figure 2-16 Thermistor Wiring Example; Figure 2-17 Bridge Sensor Wiring Example

2-9
2.6.2.4 Thermistor Wiring
For thermistor sensors connection, 2 channels are required as shown in Figure 2-16.
2.6.2.5 Bridge Sensor Wiring
For bridge based sensors excitation voltage is supplied on channels 1, 3, 9 and
11. The next consecutive even channels must be used to measure the sensor
output. Bridge based sensor inputs are only available on channels 1-2, 3-4, 9-10
and 11-12.
Hardware
2
Figure 2-16 Thermistor Wiring Example
Figure 2-17 Bridge Sensor Wiring Example