3-13
Digital Inputs
For digital inputs a sensor type must first be selected. The available selections
are frequency, totalizer and resettable counter.
Frequency
For frequency type digital inputs, the Input Type screen will appear as shown
below. Additional measurement type drop-down selections are available.
Standalone Operation
3
Figure 3-15 Input Type - Digital Frequency
2
1
3
1. Channel Type Button
The channel type selects between physical and math channel input types.
Frequency inputs are physical input channels.
2. Input Type Settings
For digital inputs there are 3 different sensor types to choose from. The
frequency type has two sub-types which affect the selects in the Data Ranges
screen. Select frequency if you are measuring purely frequency and do not
wish to convert to an engineering unit. Select volumetric flow rate if you are
measuring flow using a frequency or pulse output flowmeter.
3. Channel Map
The channel map provides a quick view of which channels have already
been configured (blue) and the currently selected channel (orange).
To Next Page
Loading...
