3-5
3
2
1
3.3 Settings Screens
Most of the data logger settings are accessible through the settings button on the
toolbar. Hitting the settings button invokes a small fly-out menu for selecting
the specific settings screen to navigate to. Additional settings related to specific
toolbar buttons functions are found in the associated screens or menus.
3.3.1 Add Channels
Channel settings can be configured for new channels using the Input Type and
Data Ranges screens. To add a new input channel and configure its settings, hit
the Add Channel button on the toolbar to navigate to the Input Type screen.
There are two types of channels which can be configured, physical input
channels and virtual math channels. Depending on the type of channel being
configured, the Input Type screen will have different settings available. The
toolbar appears as shown below when adding channels.
Input Setup – Physical Input Channel
The Input Type screen is used to configure the basic settings for an input
channel. For physical input channels the input type selected will determine the
settings available.
Temperature Inputs
For temperature input types the Input Type screen will appear as shown below.
Standalone Operation
3
Figure 3-7 Input Type - Temperature
Figure 3-6 Settings Fly-Out Menu
To Next Page
Loading...
