Omega OM-DAQXL-1 Series - Figure 3-52 Waveform and Table View; Waveform and Table View

3-43
2
3.4.3 Waveform and Table view
The waveform & table view has the same features as the waveform view with
the addition of a table showing the current values for all configured channels
can be displayed on the right third of the display area. The graph scales can be
adjusted using the scale selector in the same way as in the waveform view.
Standalone Operation
3
1. Channel Number and Name.
2. Channel Value
Shows the current value for the measured or calculated data for each
channel along with the selected engineering units.
Figure 3-52 Waveform and Table View
1