Omega OM-DAQXL-1 Series - Date and Time Trigger Events; Figure 3-26 Timer Trigger Event; Figure 3-27 Date and Time Trigger Event; Timer Trigger Events

3-23
Timer Trigger Events
When used as a start trigger event the logging session will commence after the
data logger has been armed and the configured time period has elapsed. When
used as a stop trigger the timer sets the duration of the logging session.
Standalone Operation
3
Figure 3-26 Timer Trigger Event
Figure 3-27 Date and Time Trigger Event
2
1
1. Start Timer
The Start Timer sets the delay before logging commences in HH:MM:SS
format.
2. Logging Duration
The logging during determines how long the logging session continues in
HH:MM:SS.
3. Repeat Trigger Events
If repeat trigger events are enabled, the device will automatically re-arm
itself after each logging session ends.
Date and Time Trigger Events
This trigger event option allows a specific date and time to be selected to start
and/or stop a logging session. Repeat triggers are not available for this event.
1
2
3
1. Trigger Time
Sets the time that the start or stop trigger occurs.
2. Trigger Date
Sets the date for the start or stop trigger.