System Overview (cont’d)
The Valet/Override Switch: This switch can be used to temporarily
turn “off” certain automatic locking, anti-carjacking, and optional starter interrupt
operations of the system, should they be programmed to operate, by plac-
ing the system into “Valet Mode”. If the optional starter interrupt is installed,
the Valet/Override Switch can also be used, in conjunction with the vehicle’s
ignition key, to perform a “System Override”, allowing you to start the engine,
should the transmitter not be available. The Valet/Override Switch is also used
to program features and transmitters.
The Status Light: This light shows the status of the system at a
glance, and its presence offers a visual deterrent to break-ins and theft. The
Status Light’s operation is described on pages 10-11.
Transmitter Functions Reference Guide
LOCK: Press and release the “LOCK” button.
THE HORN WILL HONK ONCE•
THE LIGHTS WILL FLASH ONCE•
THE DOORS WILL LOCK•
THE OPTIONAL STARTER INTERRUPT WILL ARM•
UNLOCK: Press and release the “UNLOCK” button.
THE HORN WILL HONK TWICE•
THE LIGHTS WILL FLASH TWICE THEN TURN ON•
THE DOORS WILL UNLOCK*•
THE OPTIONAL STARTER INTERRUPT WILL •
DISARM
* IF THE SYSTEM IS CONFIGURED FOR DRIVER’S PRIORITY, ONLY THE
DRIVER’S DOOR WILL UNLOCK. PRESS A 2ND TIME TO UNLOCK THE
OTHER DOORS.
TRUNK RELEASE: Press and hold the “TRUNK” button for 3 seconds.
THE HORN WILL HONK TWICE•
THE TRUNK WILL OPEN (IF CONNECTED)•
THE LIGHTS WILL FLASH TWICE THEN TURN ON•
THE DOORS WILL UNLOCK•
THE OPTIONAL STARTER INTERRUPT WILL •
DISARM
ACTIVATE 3RD CHANNEL: Press and hold the “
...
” button for 3 seconds.
THERE IS NO VISUAL OR AUDIBLE INDICATION •
FROM THIS SYSTEM. IF CONNECTED TO AN
OPTIONAL ACCESSORY, THAT ACCESSORY MAY
PROVIDE VISUAL/AUDIBLE CONFIRMATION UPON
ACTIVATION.
To Next Page
Loading...
