Omlet Eglu Cube Instruction Manual

Page9
To put the Lid on, lift it to the top
of the eglu, with the bolts at the
back.
Lower the Lid down making sure
the Lid Tracks (highlighted in the
detailed image), drop down infront
of the Lid Hooks (again highlighted
in the detailed image), on the side
panels.
At this point you could slide the
lid backwards, but until the back
panel is on, leave it in the forward
position as in the next image.
Step 16 - Screw the Lid Tracks onto the Side Panels
Step 17 - Screw the Lid Hooks onto the Side Panels
Step 18 - Fitting the Lid
Step 19 - Adjusting the Lid Tracks
Attach the two Lid Tracks on using
two Small Bolts and Serrated
Washers.
Attach the t
wo Lid Hooks on using
two Small Bolts and Serrated
Washers.
Note: make sure the open side of
the Hook is pointing outwards.
With the Lid in the position shown
- as far foward as it goes you may
need to adjust the Lid tracks.
By loosening the Small Bolt nearest
the front of the Lid Track you
need
to make sure the front edge of the
Lid Track is half way up the Lid
Hook. Once in position, tighten up
the bolt.

Omlet Eglu Cube Specifications

General

Ventilation	Adjustable ventilation system
Capacity	Up to 10 chickens
Features	Easy to clean, secure fox-resistant run, integrated nesting box
Color	Green or Purple
Portability	Fitted with wheels for easy movement
Included Accessories	Nesting box, roosting bars