Omnia Omnia-3 User Manual

29
Disable Remote: Allows the user to restrict access to a list of system parameters so that remote users won’t be
able to change the selected parameters. When the Disable Remote option is selected, a list of the system
parameters that are editable through the remote is displayed. When a parameter is selected, it is no longer
editable through the remote command interpreter. Selecting Exit (None on am and net styles) exits the Disable
Remote screen without disabling any parameters. To restore a parameter so that remote users can edit it, use the
Enable Remote option.
Set Time
Sets the current time for the unit. This must be performed before dayparts can be used. The time is set using the
familiar “turn and push” action of the jog wheel.
Note: The time can be synchronized to “:00” seconds by pressing the jog wheel in synchronization with the
seconds indicator of an external clock. To maintain accurate dayparting, periodically reset the internal clock to
your external reference.
Note: An additional menu will prompt you to set the unit to Daylight Saving or Standard time.
Set Date
Sets the current date. This must be performed before dayparts can be used. The date is set using the familiar
“turn and push” action of the jog wheel.
Control Port Baud
This option sets the RS-232 serial communications port baud rate. The default rate is 19200 bps.

Omnia Omnia-3 Specifications

General

Brand	Omnia
Model	Omnia-3
Category	Computer Hardware
Language	English