Omnitronic CS-406 User Manual

10050025_V_1_2.DOC
20/28
MIC
H
ere, you can connect condenser microphones or dynamic microphones via balanced XLR-cables. For
condenser microphones, you can activate the phantom power via the +48V-switch. Please respect the
warnings under +48V-switch.
Occupation balanced XLR-connection:
2
1
3
1
2
3
BalancedusewithXLRconnectors
1=Ground/Shield
2=Hot(+)
3=Cold(-)
Forunbalancedusepin1andpin3havetobebridged
Input Output
LINE
Here, you can connect the line-signals via balanced or unbalanced jack plugs.
Please note: Never activate the phantom-power when connection unbalanced jack plugs. The voltage
between the pins may lead to severe damage!
Occupation jack plug:
Unbalanceduseof
mono1/4"jackplugs
Tip=
Signal (+)
Sleeve=
Ground/Shield
Tip
Sleeve
Strainreliefclamp
Balanceduseof
Tip=
hot(+)
Sleeve=
Ground/Shield
Tip
Sleeve
Strainreliefclamp
stereo1/4"jackplugs
Ring=
cold(-)
Ring
Forconnectionofbalancedand
unbalancedplugs,ringandsleevehave
tobebridgedatthestereoplug.

Omnitronic CS-406 Specifications

General

Brand	Omnitronic
Model	CS-406
Category	Music Mixer
Language	English