EasyManua.ls Logo

Omnitronic EP-220NET - System Settings

Omnitronic EP-220NET
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
EN
8
System Settings
Here you will find all available device settings. Press the button and select the "Configuration" menu item
with the rotary knob or the arrow buttons ◄, on the remote control and confirm your selection. Many
functions can also be opened directly via the corresponding button on the remote control.
Menu item Function
Network Network options
Always on: The Wi-Fi function remains switched on (provides faster access
when switching from DAB or FM mode to Internet radio)
Auto off in 30s: The Wi-Fi function shuts down after 30 seconds when not in
use (to save energy)
Wi-Fi channels
Here you can set your country to define the country-specific WiFi radio
channels used. The default setting is Europe.
Wi-Fi network
Add/Remove AP
Add AP (Scan): The device scans for routers within the reception area (
chapter 6).
Add AP (WPS button): Activate this item and press the WPS key on your
router to conveniently access the network without entering the network key.
Add AP (SmartConfig): To configure network access with an app on your
smartphone.
Remove AP: To remove an existing network access.
AP: [...]: Indication of active network access with the option to change/remove.
Signal: ...dBm: Indicates the power of the signal the device receives via the
router. If the signal power is below 70 dBm and impairs the radio reception,
you should adjust the router’s position or check the router for technical errors.
IP [...]: To displaying/change the IP setting.
DNS [...]: To display/change the DNS setting.
LAN network
IP [...]: To displaying/change the IP setting.
DNS [...]: To display/change the DNS setting.
Date & Time
Your local time is set automatically right after an Internet connection has been
established. However, you can make the following adjustments manually:
Selecting the time zone
Display format for time display
Display format for date display
Consideration of summer and winter time
Choice between automatic time setting via the network or manual time setting
Setting the time server for automatic time setting
Automatic time setting via DAB transmitter
Automatic time setting via FM transmitter
Language
Setting the menu language; the default setting is English.
DAB setup DAB full scan
To conduct a station search in the DAB area. All stored DAB stations will be
deleted.
DAB station list
Display of the DAB stations found.
Stations can be moved or deleted. Simply select the desired channel and
press ►. A pop up menu will give you the options Move up, Move down and
Delete.

Related product manuals