How to troubleshoot low-voltage protection on Omron 3G3XV-A4022-EV2?
If your Omron Inverter is showing a low-voltage protection error (main circuit voltage insufficient), it's likely due to a drop in input voltage. Check the input power supply voltage using a tester. If the voltage is low, adjust the input voltage.
What does external fault signal input mean on Omron 3G3XV-A4022-EV2?
If the Omron Inverter is showing an external fault signal input, it means an external fault condition has occurred. Correct the cause of the fault input.
Identifies the SYSDRIVE 3G3XV inverter and the operation manual.
Warns about the consequences of not reading and understanding the manual.
Crucial safety warnings and environmental conditions for proper inverter installation.
Shows the typical wiring connections for main and control circuits.
Details main circuit connections, terminal functions, and arrangement for different models.
Important safety and operational notes for main circuit connections.
Advises on voltage drop, AC reactors, wiring length, and proper grounding methods.
Shows the standard wiring diagram for the control circuit.
Essential precautions for wiring control signals to prevent malfunctions.
Procedures for operating the inverter using the digital operator or external terminals.
Detailed specifications for 200-V class SYSDRIVE 3G3XV inverters.
Detailed specifications for 400-V class SYSDRIVE 3G3XV inverters.
Explains the purpose of each key and indicator on the digital operator.
Explains how to read and change inverter constants using the operator.
Provides a step-by-step example of operating the inverter via the digital operator.
Explains how to reset all constants to their original factory settings.
Explains how to monitor frequency, current, and fault contents on the operator.
Lists potential causes for protection functions and recommended actions to resolve them.
Addresses common motor faults like not rotating or wrong direction and their solutions.
To Next Page
General