23
appears
The arm cuff is inflated
exceeding the maximum
allowable pressure.
Do not touch the arm cuff
and/or bend the air tube
while taking a measurement.
If inflating the arm cuff
manually, refer to sub-
section 3.1.
appears
Moving or talking during a
measurement results in
vibrations that disrupt the
measurement.
Remain still and do not talk
during a measurement.
appears
The pulse rate is not
detected correctly.
Apply the arm cuff correctly,
then take another
measurement.
Refer to sub-section 2.3.
Remain still and sit correctly
during a measurement.
If the “ ” symbol
continues to appear, it is
recommended that you
consult with your physician.
/
appears
does not flash during a
measurement
appears
The monitor has
malfunctioned.
Press the [START/ STOP]
button again. If “Er” still
appears, contact customer
service. Refer to section 11.
flashes
Batteries are low.
Replacing all 4 batteries
with new ones is
recommended. Refer to
sub-section 2.1.
Display/Problem Possible Cause Solution
To Next Page
