Omron BP710CANN - Measurement Procedure; High Systolic Pressure Measurement

15
1. Press the START/STOP button.
The arm cuff will start to inflate automatically.
USING THE DEVICE
START INFLATE DEFLATE COMPLETE
If your systolic pressure is more than 210 mmHg
After the arm cuff starts to inflate, press and hold the START/STOP
button until the monitor inflates 30 to 40 mmHg higher than your
expected systolic pressure.
Notes:
• The monitor will not inflate above 299 mmHg.
Inflating to a higher pressure than necessary may result in bruising
where the arm cuff is applied.