EasyManuals Logo

Omron BU1002SW User Manual

Omron BU1002SW
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
22
2. Installation and Connection
Plug of connected device
Connect it directly.
• Procedure for connection to power supply output receptacle (IEC60320 C13)
Procedure for connection to BU1002SW output terminal block
When in use, make sure the output terminal block cover is attached.
Do not turn ON the power switch when it is detached.
Voltage is applied to the output terminal block when the power switch is ON, which can
result in electric shock.
When connecting a device to the output terminal block, make sure to
include an emergency stop switch (ESD) between them.
In the event of an accident, the power supply to the device can be stopped by pressing
the emergency stop switch.
A disconnect switch shall be provided by others for ac output terminal block circuit.
To reduce the risk of fi re, connect only to an emer-
gency stop switch (ESD) overcurrent protection for
15 amperes rating in accordance with the National
Electric Code, ANSI/NFPA 70, when using the UPS
as a device conforming to UL, CE standard.
Lors de l’utilisation, s’assurer que le couvercle du bornier de sortie
est bien fi xé.
Ne pas allumer l’interrupteur d’alimentation lorsqu’il est détaché.
Une tension est appliquée au bornier de sortie lorsque l’interrupteur d’alimentation est
allumé, ce qui peut provoquer un choc électrique.
Lors de la connexion d’un périphérique au bornier de sortie, s’assurer
de bien inclure un interrupteur d’arrêt d’urgence (ESD) entre eux.
En cas d’accident, l’alimentation électrique de l’appareil peut être arrêtée en appuyant
sur l’interrupteur d’arrêt d’urgence.
Un sectionneur doit être fourni par d’autres pour le circuit du bornier de sortie AC
Pour réduire le risque d’incendie, connecter
uniquement à un interrupteur d’arrêt d’urgence
(ESD) de protection contre les surtensions pour
la catégorie 15 ampères conformément au
Code national électrique, ANSI/NFPA 70, lors de
l’utilisation de l’ASC comme un dispositif conforme
aux normes UL, CE.
Caution
Attention
ESD
emergency stop
switch (ESD)
UPS Load
ESD
Interrupteur d'arrêt
d'urgence (ESD)
ASC Chargement

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Omron BU1002SW and is the answer not in the manual?

Omron BU1002SW Specifications

General IconGeneral
BrandOmron
ModelBU1002SW
CategoryUPS
LanguageEnglish

Related product manuals