127
Setting Tag Data Links Section 6-2
1. Creating Tags and Tag Sets Using the Network Configurator's Device Parameter
Editing Function
Note The network symbols described in this section can be used only if you are
using a CJ2H-CPU6@-EIP21 or CJ2M-CPU3@ CPU Unit.
Creating a Tag Set
1,2,3... 1. Double-click the icon of the device (for which a tag set is being created) to
display the Edit Device Parameters Dialog Box. Right-click the icon to dis-
play the pop-up menu, and select Parameter - Edit.
2. Click the Tag Sets Tab at the top of the Edit Device Parameters Dialog Box.
There are two kinds of tag sets: input (consume) and output (produce).
To Next Page
Loading...
