Enclosed Switch D4C F-9
Limit
Switches
Enclosed Switch
D4C
Sealed, Compact, and Slim-bodied Switch
Offers Choice of Many Actuators
• Liquid- and dust-resistance conforms to IEC IP67 standard.
• Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and dia-
phragm; switch section sealed via nitrile rubber cap; cable en-
trance sealed via encapsulating material.
• Standard cable (S-FLEX VCTF) in 2-, 3-, or 5-meter lengths of-
fers high flexibility with outstanding oil and extreme temperature
resistance.
• Low temperature models are available.
Model Number Structure
■ Model Number Legend
Standard Models
1. Rated Current
1: 5 A at 250 VAC, 4 A at 30 VDC
2: 5 A at 125 VAC (with LED indicator)
3: 4 A 30 VDC (with LED indicator)
4: 0.1 A at 125 VAC, 0.1 A at 30 VDC
5: 0.1 A at 125 VAC (with LED indicator)
6: 0.1 A at 30 VDC (with LED indicator)
2. Cable Specifications
2: VCTF oil-resistant cable (3 m)
3: VCTF oil-resistant cable (5 m)
4: VCTF (3 m)
5: VCTF (5 m)
6: SJT(O) (3 m)
7: SJT(O) (5 m)
8: VCTF oil-resistant cable (2 m)
9: VCTF (2 m)
3. Actuator
01: Pin plunger
02: Roller plunger
03: Crossroller plunger
10: Bevel plunger
20: Roller lever
24: Roller lever (high-sensitivity model)
31: Sealed pin plunger
32: Sealed roller plunger
33: Sealed crossroller
41: Panel mount pin plunger
42: Panel mount roller plunger
43: Panel mount crossroller plunger
50: Plastic rod
60: Center roller lever plunger
Note 1: Some combinations of the above may not be supported.
2: With standard models, the operation indicator turns OFF
when the switch operates. If models with operation indicators
that turn ON when the switch operates are required, add "-B”
to the end of the model number.
1 2 3
D4C-@@@
To Next Page
Need help?
General
