Omron E2E series - Page 38

7
．
IO-Link Connection Procedure
35
13
Check that Proximity Sensor is
connected online.
Right-click <IO-Link Port_1:->
E2E-X3B4-IL3 IODD1.1 and select
Configuration from the menu.
*When <IO-Link Port_1:->
E2E-X3B4-IL3 IODD1.1 is
displayed in bold italic font,
Proximity Sensor is connected
online.
14
The <IO-Link Port_1:-> E2E-X3B4
-IL3 IODD1.1 - Configuration Tab
Page is displayed.
15
Select Observation listed under
Menu on the <IO-Link Port_1:->
E2E-X3B4-IL3 IODD1.1 –
Configuration Tab Page.
If Process Data In on the right side
of the tab page is not expanded,
click the + Button of Process Data In
to expand.
16
Click the icon (Enable or disable
cyclic read from device for dynamic
variables) on the <IO-Link Port_1:->
E2E-X3B4-IL3 IODD1.1 -
Configuration Tab Page.
The present values of the process
data for Proximity Sensor are
displayed in the Value Column.