Omron E2E series User Manual

8
．
Initialization method
40
(5) The Clear All Memory for Coupler Dialog Box is displayed. Check that Coupler + NX Units
is selected. Click Execute.
Precautions for Correct Use
In the initialization of Slave Terminal, the backup data for the IO-Link devices that is stored in
IO-Link Master Unit is not cleared. If you need to clear the backup data stored in IO-Link
Master Unit, refer to Clearing Backup Data in 7-4-2 Backing Up Settings of the IO-Link
System User’s Manual (Cat. No. W570) to clear the backup data.

Omron E2E series Specifications

General

Brand	Omron
Model	E2E series
Category	Network Hardware
Language	English