Omron E5C-T Series User Manual

4 - 17
4 Basic Operation
E5@C-T Digital Temperature Controllers User’s Manual (H185)
4-2 Initial Setup Examples through Starting Program Operation
4
4-2-3 Initial Setup Example for Rate of Rise Programming
For details, refer to 4-7 Setting Programs for details on the rate of rise programming example.
Additional Information
If you need to execute autotuning before the SP is reached, change the SP Mode parameter to
Fixed SP Mode, set the desired SP, and then execute autotuning.
6 Start
pro-
gram
opera-
tion.
• Set the Run/Reset parameter to Run. 6-14
Item Operating flow Settings Page
Start program operation.
Operation Level

Omron E5C-T Series Specifications

General

Brand	Omron
Model	E5C-T Series
Category	Temperature Controller
Language	English