To Next PageTo Next PageWhat to do if the SP is being held on my Omron Temperature Controller?
If the SP is being held on your Omron Temperature Controller, check the HOLD indicator. If it is lit, change the Hold parameter to OFF.
General| Model | E5CC-T |
|---|---|
| Type | Digital Temperature Controller |
| Display Type | LCD |
| Display Digits | 4 |
| Input Type | Thermocouple, RTD, Analog |
| Alarm Output | Yes |
| Dimensions | 48 x 48 x 78 mm |
| Mounting | Panel Mount |
| Ambient Operating Temperature | 0 to 55 °C |
| Output Type | Relay, Voltage, Current |
| Power Supply | 100-240 VAC |
| Control Method | ON/OFF |
| Communication | RS-485 |
| Alarm Output Points | 2 |
| Setting Resolution | 0.1°C |
