Omron E5CC User Manual

4 - 13
4 Basic Operation
E5@C Digital Temperature Controllers User’s Manual (H174)
4-4 Selecting the Temperature Unit
4
4-4-1 Temperature Unit
4-4 Selecting the Temperature Unit
• Either °C or °F can be selected as the temperature unit.
• Set the temperature unit in the Temperature Unit (d-u) parameter of the Initial Setting Level. The
default is c (°C).
The following procedure selects °C.
* The temperature unit is not displayed by the E5DC and E5DC-B.
4-4-1 Temperature Unit
Operating Procedure
1 Press the M Key several times in the Initial Setting Level to
display d-u (Temperature Unit).
Initial Setting Level
2 Press the U or D Key to select °C.
The default is c (°C).
c: °C, f: °F
c
d-u
Temperature
Unit
c
d-u

Omron E5CC Specifications

General

Number of Display Digits	4 digits
Number of Control Outputs	1
Control Method	ON/OFF
Input Type	Thermocouple, RTD, Analog voltage, Analog current
Supply Voltage	100 to 240 VAC
Output Type	Relay, Voltage, Current
Display Type	LCD
Size	48 x 48 mm
Mounting Method	Panel mount
Control Output	Relay, Voltage, Current
Alarm Output	Relay
Communication	RS-485
Ambient Operating Temperature	-10 to 55°C
Ambient Operating Humidity	25% to 85% RH
Protection Rating	IP66