E5CK
E5CK
7
Nomenclature
Operation Indicators
· OUT1
Lit when the pulse output
function assigned to control
output 1 turns ON.
· OUT2
Lit when the pulse output
function assigned to control
output 2 turns ON.
· SUB1
Lit when the output function
assigned to auxiliary output 1
turns ON.
· MANU
Lit when the manual opera-
tion mode.
· STOP
Lit during operation has
stopped.
· RMT
Lit during remote operation.
· AT
Flashes during auto-tuning.
A/M Key
Press to select the auto operation or
manual operation.
No. 1 Display
Displays the process value or pa-
rameter symbols.
No. 2 Display
Displays the set point, set point dur-
ing SP ramp, manipulated variable,
or parameter settings.
Up Key/Down Key
Press to increase or decrease the
value on the No.2 display.
Display Key
Press for less than 1 s to shift the
display to the next parameter. When
this key is pressed for 1 s or more,
the menu screen will be displayed in
any case.
To Next Page
Loading...
