E5jK-T
E5jK-T
30
Specifications
Input Type
Set
the code according to the following table. Default is
“2: K1 ther
-
mocouple.”
Platinum Resistance Thermometer
Set Input
t
pe
value
u
0 JPt100
–199.9 to 650.0 (
°C)
/–199.9 to 999.9 (
°F)
Platinum
resistance
1 Pt100
–199.9 to 650.0 (
°C)
/–199.9 to 999.9 (
°F)
thermometer
2 K1
–200 to 1,300 (
°C)
/–300 to 2,300 (
°F)
Thermocouple
3 K2
0.0 to 500.0 (
°C)
/0.0 to 900.0 (
°F)
4 J1
–100 to 850 (
°C)
/–100 to 1,500 (
°F)
5 J2
0.0 to 400.0 (
°C)
/0.0 to 750.0 (
°F)
6 T
–199.9 to 400.0 (
°C)
/–199.9 to 700.0 (
°F)
7 E
0 to 600 (
°C)
/0 to 1,100 (
°F)
8 L1
–100 to 850 (
°C)
/–100 to 1,500 (
°F)
9 L2
0.0 to 400.0 (
°C)
/0.0 to 750.0 (
°F)
10 U
–199.9 to 400.0 (
°C)
/–199.9 to 700.0 (
°F)
11 N
–200 to 1,300 (
°C)
/–300 to 2,300 (
°F)
12 R
0 to 1,700 (
°C)
/0 to 3,000 (
°F)
13 S
0 to 1,700 (
°C)
/0 to 3,000 (
°F)
14 B
100 to 1,800 (
°C)
/300 to 3,200 (
°F)
15 W
0 to 2,300 (
°C)
/0 to 4,100 (
°F)
16 PLII
0 to 1,300 (
°C)
/0 to 2,300 (
°F)
17
4 to 20 mA
Current input
18
0 to 20 mA
19
1 to 5 V
V
oltage input
20
0 to 5 V
21
0 to 10 V
Output Assignments
Thirteen
output functions are available. Allocate these functions to
the
control outputs 1 and 2 and auxiliary outputs 1 and 2.
There are some limitations on some output function allocations.
Output
function types and allocation
limitations are as described in
the
following.
Identical
output functions cannot be
allocated doubly to the control
output
1 or 2 and auxiliary output 1 or 2.
Standard Models
Assignment
Destination
Control Output Auxiliary Output
Output Function
1 2 1 2
Control output (heat)
(see note 1)
Yes Yes No No
Control output (cool)
(see note 1)
Yes Yes No No
Alarm 1
Yes Yes Yes Yes
Alarm 2
Yes Yes Yes Yes
Alarm 3
Yes Yes Yes Yes
HBA (see notes 1, 2)
Yes Yes Yes Yes
LBA (see note 1)
Yes Yes Yes Yes
T
ime signal 1
Yes Yes Yes Yes
T
ime signal 2
Yes Yes Yes Yes
Program end
Yes Yes Yes Yes
Stage output
(see note 1)
Yes Yes Yes Yes
Error 1 : Input error
No No Yes Yes
Error 2 : A/D convertor
error
No No Yes Yes
Note: 1. Assignment
is not possible with the control valve control
type.
2. Heater
burnout alarm is not available for the E5CK.
Position-proportional Models
Position-proportional-type Controllers support nine output func-
tions.
These are assigned to auxiliary outputs 1 and 2.
Restrictions
on assignment destinations are placed on
some of the
outputs.
The following table shows where outputs may be assigned
to.
Assignment
Destination
Control Output Auxiliary Output
Output Function
1 2 1 2
Alarm 1
No No Yes Yes
Alarm 2
No No Yes Yes
Alarm 3
No No Yes Yes
T
ime signal 1
No No Yes Yes
T
ime signal 2
No No Yes Yes
Stage output
No No Yes Yes
Program end output
No No Yes Yes
Error 1 : Input error
No No Yes Yes
Error 2 : A/D converter
error
No No Yes Yes
With control output (cool), the conditions for switching from stan-
dard control to heating and cooling control are reached when the
output function is assigned at the cooling side during heating and
cooling
control.
In
other words, heating and
cooling control is carried out when con
-
trol output (cool) is assigned, and standard control is carried out
when
output is not assigned.
To Next Page
Loading...
