15
SETTING THE STRIDE LENGTH
Setting range: 1'00'' to 4'00'' feet
The stride length ashes on the display.
1. Press the MEMO/▲ Button to advance by
increments of 1 inch.
Press and hold the button to advance the
stride in 4 inches increments.
NOTE:
Press the MODE Button to return the
stride length to 1'08''.
2. Press the SET Button to the stride length.
The number of steps and time will be
displayed.
All the settings are completed.
To change the time, weight, or stride length after the setting is
completed:
1. Press and hold the SET Button for 2 seconds.
2. Change the setting.
NOTE:
If setting does not need to be changed, press the set button to advance
to the next setting.
To Next Page
Loading...
Need help?
General
