H5CC
13
Accessories (Order Separately)
Protecting the Timer in Environments Subject to Oil
The Waterproof Packing will deteriorate, harden, and shrink
depending on the application environment. To ensure maintaining the
IP@6 waterproof level, periodically replace the Waterproof Packing.
The periodic replacement period will depend on the application
environment. You must confirm the proper replacement period. Use
one year or less as a guideline. If the Waterproof Packing is not
replaced periodically, the waterproof level will not be maintained.
It is not necessary to mount the Waterproof Packing if waterproof
construction is not required.
The Y92S-35 is not provided with the Y92F
-38. Order separately, if
water
protection is required. Use Waterproof Packing to provide a
level of water protection that complies with IP65 standards.
Depending on the operating environment, the Waterproof Packing
may deteriorate, contract, or harden and so regular replacement is
recommended. The periodic replacement period will depend on the
application environment. You must confirm the proper replacement
period. Use one year or less as a guideline. If the Waterproof Packing
is not replaced periodically, the waterproof level will not be
maintained.
The H5CC’s panel surface is water-resistive (IP@6) and so even if
dr
ops of water
penetrate the gaps between the keys, there will be
no adverse effect on internal circuits. If, however, there is a
possibility of oil being present on the operator’s hands, use the Soft
Cover. The Soft Cover ensures protection equivalent to IP54
against oil. Do not, however, use the H5CC in locations where the
front section would come in direct contact with oil.
Note: Depending on the operating environment, the condition
of resin products may deteriorate, and may shrink or
become harder. Therefore, it is recommended that resin
products are replaced regularly.
Soft Cover
Y92A-48F1
Hard Cover
Y92A-48
The Soft Cover is attached
by inserting the front part
between the holding clips.
Waterproof Packing
Y92S-P6
* The Waterproof Packing is included
with models with screw terminals.
Order the Waterproof Packing separately
if it is lost or damaged.
The Waterproof Packing can be used to
achieve IP66 protection.
Flush Mounting Adapter
Y92F-30
Order the Flush Mounting Adapter separately
if it is lost or damaged.
Note: A Flush Mounting Adapter is included
with models with screw terminals.
47 66
Y92F-30 (order separately)
Flush Mounting Adapter
Y92S-35 (order separately)
Waterproof Packing
Y92S-29
Waterproof Packing
Unit
insertion
direction *
Unit
insertion
direction *
* Insert the timer unit from front side of adapter.
* Use Waterproof Packing to provide a level of water protection that
complies with IP@6 standards.
* It is not necessary to mount the Waterproof Packing if waterproof
construction is not required.
70±
0.4
Four, 5-dia. holes
70
±
0.4
81-dia. hole
Waterproof Packing
Y92S-35
87
76
4.7
69.6 to 77.6
72 u 72
67 u 67
Fixture (provided)
77.3
2.2
4.7
Panel (1 to 8 mm)
48 u 48
72 u 72
Y92F-45
<H5CC Mounting Example>
Note: 1. The adapter is black in color.
Note: 2. The Y92F-45 can be used in combination with the
Y92F-30 Adapter provided with the Timer.
77.3
2.2
4.7
Panel (1 to 8 mm)
48 u 48
72 u 72
To Next Page
Loading...
