Omron H5CN User Manual

H3DR-A/P/M
H3DR-A/P/M
85
PNP Input
Models
The inputs of the H3DR-AP/--ASP/-PP are voltage (voltage imposition or open) inputs.
H3DR-AP/-ASP
Voltage Inputs
No-contact Input
(Connection to PNP output sensor.)
Contact Input
12 to 24 VDC (sensor
power supply)
Sensor
Timer
A
1
Start/reset/
gate
Operates with transistor ON
+
--
DC power
supply
Timer
Operates with relay ON
A
1
Start/reset/
gate
A
2
(0 V)
Voltage Input Signal Levels
No-contact
input
Contact
input
1. Voltage imposition
Transistor ON
Residual voltage: 1 V max.
Impedance when ON: 1 k
$
max.
2. Open level
Transistor OFF
Impedance when OFF: 100 k
$
min.
Use contacts which can
adequately switch 0.1 mA at 5 V
H3DR-PP
Voltage inputs
No-contact Input (for 24 VDC/VAC Model)
(Connection to PNP output sensor.)
Contact Input
Voltage Input Signal Levels
No-contact
input
Contact
input
1. Transistor ON
Residual voltage: 1 V max.
(Voltage between terminals B
1
and A
2
must be more than
the operating voltage range.)
2. Transistor OFF
Leakage current: 0.01 mA max.
(Voltage between terminals B
1
and A
2
must be less than
the operating voltage range.)
Use contacts that can adequately switch 0.1 mA at each
voltage to be imposed. (When the contacts are ON or
OFF, voltage between terminals B
1
and A
2
must be more
than the operating voltage range or less than the
operating voltage range respectively.)
Sensor
A
1
B
1
Start
A
2
24 VDC
A
1
B
1
Start
A
2
Operates with transistor ON Operates with relay ON
TimerTimer

Omron H5CN Specifications

General

Brand	Omron
Model	H5CN
Category	Timer
Language	English