7
2. Preparation
2.1
Battery Installation
1. Remove the battery cover.
2. Insert 4 “AA” batteries as
indicated in the battery
compartment.
3. Replace the battery cover.
Notes:
• Please keep the batteries in your device all the time when you use an optional AC adapter.
• When the depleted battery symbol ( ) appears on the display, turn the monitor off and remove all the
batteries. Replace with 4 new batteries at the same time. Long life alkaline batteries are recommended.
• The measurement values continue to be stored in memory even after the batteries are replaced.
• The supplied batteries may have a shorter life.
• Dispose of the device, components and optional accessories according to applicable local regulations.
Unlawful disposal may cause environmental pollution.
HEM-7280T-AP_B_M.fm Page 7 Tuesday, October 13, 2015 2:51 PM
To Next Page
Loading...
