Omron HEM-7320 User Manual

15
4. Troubleshooting and Maintenance
EN
Air plug disconnected.
Insert the plug securely.
Refer to section 3.1.
Arm cuff not applied correctly.
Apply the arm cuff correctly.
Refer to section 3.1.
Air is leaking from the arm cuff.
Replace the cuff with the new one.
Refer to Chapter 5.
Movement during measurement and the arm
cuff has not been inflated sufficiently.
Repeat measurement. Remain still and do not
talk during measurement.
Refer to section 3.3.
If “E2” appears repeatedly, inflate the cuff
manually until it is 30 to 40 mmHg above your
previous measurement result.
Refer to section 3.3.
The arm cuff was inflated above 299 mmHg
when inflating the cuff manually.
Do not inflate the cuff above 299 mmHg.
Refer to section 3.3.
Movement during measurement.
Repeat measurement. Remain still and do not
talk during measurement.
Refer to section 3.3.
Clothing is interfering with the arm cuff.
Remove any clothing interfering with the arm
cuff.
Refer to section 3.1.
Device error. Contact your local OMRON representative.
Error Display Cause Remedy

Omron HEM-7320 Specifications

General

Model	HEM-7320
Category	Blood Pressure Monitor
Irregular Heartbeat Detection	Yes
Body Movement Detection	Yes
Measurement Range Pressure	0-299 mmHg
Accuracy Pressure	±3 mmHg
Accuracy Pulse	±5% of reading
Inflation	Automatic by electric pump
Deflation	Automatic pressure release valve
Measurement Method	Oscillometric method
Cuff Size	22 – 42 cm
Display	LCD
Power Source	4 AA batteries or AC adapter
Device Type	Upper Arm
Measurement Range Pulse	40-180 beats/min
Weight	Approx. 380g without batteries