Omron HEM-7320 User Manual

4
2. Preparation
2.1 Installing/Replacing the
Batteries
1. Remove the battery cover.
2. Insert 4 “AA” batteries as
indicated in the battery
compartment and then replace the battery cover.
Notes:
• If the low battery symbol ( ) appears on the display, turn the monitor off then replace all batteries at the same
time.
• The measurement values continue to be stored in memory even after the batteries are replaced.
• The supplied batteries may have a shorter life.
Disposal of used batteries should be carried out in accordance with the national
regulations for the disposal of batteries.

Omron HEM-7320 Specifications

General

Model	HEM-7320
Category	Blood Pressure Monitor
Irregular Heartbeat Detection	Yes
Body Movement Detection	Yes
Measurement Range Pressure	0-299 mmHg
Accuracy Pressure	±3 mmHg
Accuracy Pulse	±5% of reading
Inflation	Automatic by electric pump
Deflation	Automatic pressure release valve
Measurement Method	Oscillometric method
Cuff Size	22 – 42 cm
Display	LCD
Power Source	4 AA batteries or AC adapter
Device Type	Upper Arm
Measurement Range Pulse	40-180 beats/min
Weight	Approx. 380g without batteries