Omron HEM-7320 User Manual

18
4. Troubleshooting and Maintenance
4.3 Maintenance
To protect your unit from damage, please observe the following:
• Do not subject the main unit and the cuff to extreme temperatures, humidity, moisture or direct sunlight.
• Do not fold the cuff or tubing tightly.
• Do not inflate the arm cuff over 299 mmHg.
• Do not disassemble the unit.
• Do not subject the unit to strong shocks or vibrations (for example, dropping the unit on the floor).
• Do not use volatile liquids to clean the main unit.
• Do not wash the arm cuff or immerse it in water.
• Do not use petrol, thinners or similar solvents to clean the arm cuff.
• Do not carry out repairs of any kind yourself. If a defect occurs, consult your local OMRON representative.
• The unit should be cleaned with a soft, dry cloth.
• Use a soft, moistened cloth and neutral soap to clean the arm cuff.
Note: Read and follow the "Correct Disposal of This Product" in "6.Technical Data" when disposing of the
device and any used accessories or optional parts.
Calibration and Service
• The accuracy of this blood pressure monitor has been carefully tested and is designed for a long service
life.
• It is generally recommended to have the unit inspected every 2 years to ensure correct functioning and
accuracy. Please consult your local OMRON representative.

Omron HEM-7320 Specifications

General

Model	HEM-7320
Category	Blood Pressure Monitor
Irregular Heartbeat Detection	Yes
Body Movement Detection	Yes
Measurement Range Pressure	0-299 mmHg
Accuracy Pressure	±3 mmHg
Accuracy Pulse	±5% of reading
Inflation	Automatic by electric pump
Deflation	Automatic pressure release valve
Measurement Method	Oscillometric method
Cuff Size	22 – 42 cm
Display	LCD
Power Source	4 AA batteries or AC adapter
Device Type	Upper Arm
Measurement Range Pulse	40-180 beats/min
Weight	Approx. 380g without batteries