12
3. Using the Unit
3.4
Using the Memory Function
The monitor automatically stores the result up to 90 sets. It can also calculate an
average reading based on the measurements from the last three readings taken
within 10 minutes. If there are only two readings in memory for that period, the
average will be based on two readings. If there is one reading in memory for that
period, the average will be based on one reading.
Notes:
• If the memory is full, the monitor will delete the oldest readings.
• When viewing the reading taken without setting the date and time,
“-/ - -:--”
is displayed instead of the date and
time.
To View the Readings Stored in Memory
1. Press the button.
The Memory number appears for a second before the
pulse rate is displayed. The newest set is numbered “1”.
Note: The blood pressure colour indicator lights and the cuff
wrapping guide result appears on the display with the
measurement values.
2. Press the or button to view the readings stored in
memory.
: To the older readings
: To the more recent readings
To Next Page
Loading...
