Omron HEM-7322 - 2.2 Setting the Date and Time

5
2. Preparation
EN
2.2 Setting the Date and Time
1. Press the button.
2. Set the monitor to the correct date and time before
taking a measurement for the first time.
3. Press the START/STOP button to store the setting.
Notes:
• If the batteries have been replaced, the date and time setting will need to be reset.
• If the date and time are not set, “-/ - -:--” appears during or after measurement.
1)
2)
Push or buttons to
change.
Push the button to confirm.
Next setting appears.
Month
Day
Hour
Minute
Year