Omron HN-290T User Manual

12
4. Transfer the Data
As soon as the measurement is completed, the data will be transferred automatically
as below.
Transferring the data. The transfer is completed.
The unit will automatically
turn o󰀨 after 10 seconds
without any operations.
Notes:
• When the connection symbol ( ) does not appear, refer the "The data is not
being transmitted." in section 6.2 for more detail.
• If SYNC symbol ( ) is displayed, it means 1 or more readings have stored.
30 readings could be stored at most. If the memory is full, the unit will delete the
oldest reading.

Omron HN-290T Specifications

General

Brand	Omron
Model	HN-290T
Category	Scales
Language	English