22
11. Guidance and Manufacturer’s Declaration
(Table 1)
Guidance and manufacturer’s declaration – electromagnetic emissions
OMRON Digital Weight Scale is intended for use in the electromagnetic
environment specied below. The customer or the user of this OMRON Digital
Weight Scale should assure that it is used in such environment.
Emissions test Compliance
Electromagnetic environment – guidance
RF emissions CISPR 11
Group 1
The OMRON Digital Weight Scale uses
RF energy only for its internal function.
Therefore, its RF emissions are very low
and are not likely to cause any interference
in nearby electronic equipment.
RF emissions CISPR 11
Class B
The OMRON Digital Weight Scale is
suitable for use in all establishments,
including domestic establishments and
those directly connected to the public low-
voltage power supply network that supplies
buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Not
Applicable.
Voltage uctuations/
icker emissions
IEC61000-3-3
Not
Applicable.
(Table 2)
Guidance and manufacturer’s declaration – electromagnetic immunity
OMRON Digital Weight Scale is intended for use in the electromagnetic
environment specied below. The customer or the user of this OMRON Digital
Weight Scale should assure that it is used in such environment.
Immunity test
IEC 60601
Test level
Compliance
level
Electromagnetic
environment – guidance
Electrostatic
discharge
(ESD) IEC
61000-4-2
±6 kV
contact
±8 kV air
±6 kV
contact
±8 kV air
Floor should be wood, concrete,
or ceramic tile. If oors are covered
with synthetic material, the relative
humidity should be at least 30 %.
To Next Page
Loading...
Need help?
General