29
3. Using the Unit
EN
3.5 Using the Memory Function
The unit is designed to store the blood pressure and the pulse rate in
the memory for two people (user A and user B) every time a
measurement is completed.
The unit automatically stores up to 84 sets of measurement values
(blood pressure and pulse rate) for each user (A and B). When 84 sets
of measurement values are stored, the oldest record is deleted to save
the most recent values. The unit also stores 8 weeks of morning
averages and 8 weeks of evening averages for each user (A and B).
Average Function
The unit calculates the average reading based on the three most
recent sets of measurement values taken within 10 minutes of the most
recent reading.
Note: If two sets of measurement values are stored in the
memory for the 10 minutes period, the average is based
on the two sets of measurement values. If one set of
measurement values is stored, this is displayed as the
average.
To Display the Measurement Values
1. Press the O/I button to turn the power on.
2. Press the User ID selection button to select the user ID (A
or B).
To Next Page
Loading...
Need help?
General
