TO CONNECT THE AC ADAPTER
① Insert the AC Adapter Plug
into the AC Adapter Jack on
the back side of the monitor
as illustrated.
② Plug the AC Adapter into a
120V AC outlet (60 cycles).
TO DISCONNECT THE AC ADAPTER
① Hold and pull the Housing to remove the AC Adapter from the
electrical outlet. Do not remove by pulling on the cord.
② Remove the AC Adapter plug from the monitor.
WARNING
Do not plug or unplug the power cord into the electrical outlet with
wet hands.
CAUTION
Do not overload power outlets. Plug the device into the appropriate
voltage outlet.
USING THE AC ADAPTER
17
Housing
Cord
HEM-775 IM Final.qxd 11/16/06 4:03 PM Page 17
To Next Page
Loading...
Need help?
General
