2. Press the START/STOP button.
All symbols appear on the display. The USER ID Symbol you
selected flashes on the display.
The cuff starts to inflate automatically. As the cuff inflates, the
monitor automatically determines your ideal inflation level. This
monitor detects the pulse during inflation. Do not move your arm and
remain still until the entire measurement process is completed.
NOTE: To stop the inflation or measurement, press the START/STOP
button. The monitor will stop inflating, start deflating and will
turn off.
3. Inflation stops automatically and the measurement is started.
As the cuff deflates, decreasing numbers appear on the display.
The Heartbeat Symbol ( ) flashes at every heartbeat.
TAKING A MEASUREMENT
31
HEM-775 IM Final.qxd 11/16/06 4:03 PM Page 31
To Next Page
Loading...
Need help?
General
