Omron IntelliSense HEM-907XL - How to Measure Blood Pressure (Single Mode); Steps 1-3: Setup and Inflation Setting; Step 4: Cuff Application

19
1. Push the ON/OFF (power) Button to
turn on the power.
2. Set the MODE Selector to “SINGLE”.
3. Set the P-SET (inflation level) Knob
to “AUTO” or to the target pressure
value.
4. Measure the patient’s arm size, and
wrap appropriate cuff over the
patient’s arm. (Refer to Pages 13
and 14.)
HOW TO MEASURE
BLOOD PRESSURE
(IN SINGLE MODE)
E
HEM-907-Z2_E_M.qxd 09.8.28 11:45 AM Page 19