To Next Page

To Previous Page

12 Process Meter K3MA-J

■ Parameters

−

For models with the

comparative output

function

MODE

Set one of these.

Current value

OUT1 value

OUT1

upper-limit

value

OUT1

lower-limit

value

OUT2

upper-limit

value

OUT2

lower-limit

value

OUT2 value

Note: 1. Some parameters are not displayed for certain models.

2. The K3MA-J will stop measurement if the level is changed to the initial setting level or

the advanced-function setting level.

3. If the input range is changed, some parameters are set to default values. Therefore,

set the input range first.

4. Settings displayed in reversed colors are defaults.

Power ON

Operation level

Omron K3MA-J Manual

Other manuals for Omron K3MA-J