Omron M1 Classic - Operating the Blood Pressure Monitor; Control Functions and Buttons; Measurement Display Explained

M1 Classic English
4
4 Operation
PULSE/min
DIA
mmHg
SYS
mmHg
M
H
K
C
B
N
L
M
Q
R
S
T
U
P
Control functions
B Memory recall button
C On/off button
H Air inflation bulb
K Air release button
Measurement
L Systolic blood pressure in mmHg.
M Heart symbol: flash - measurement
takes place, light up - finish
measurement.
N Diastolic blood pressure in mmHg.
P Memory display: values in memory.
Q Memory position: 1 to 14.
R Inflation: cuff inflates and measurement
starts.
S Deflation: cuff deflates and
measurement finishes.
T Battery exhausted: batteries are
weak/exhausted.
U Pulse: heartbeats per minute.
Caution! Allow an interval of at least
three minutes between two successive
measurements!
1-2 cm
Note: for right arm use keep the tube
parallel with your little finger!
4 Hold the end of the cuff and wrap it
around your arm.
Caution! Be sure the cuff fits closely;
do not pinch your arm!
28070122-03 Manual M1 GB 01-12 28-11-2008 09:19 Pagina 4