13
3.Using the Unit
EN
3.2
Applying the Arm Cuff
Be sure to wrap the arm cuff correctly so that you get accurate results.
Measurements can be taken in light clothing. However, please remove
thick clothes, such as sweaters, before taking a reading.
1. Connect the air tube of the arm cuff and the inflation bulb to
their respective air connectors.
2. Put your left arm through the cuff
loop.
Note: If the cuff is not assembled,
pass the end of the cuff
furthest from the tubing
through the metal D-ring to
form a loop. The smooth
cloth should be on the inside
of the cuff loop.
HEM-4022-IM_Main_[D].book 13 ページ ２０１１年１１月２日 水曜日 午後３時２４分
To Next Page
Loading...
Need help?
General
